RUT901

Product Catalog
Share:

 FEATURES

 MOBILE

 Mobile module 4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps
 SIM switch 2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection
 Status Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, Bytes sent/received, connected band, IMSI, ICCID
 SMS SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP
 USSD Supports sending and reading Unstructured Supplementary Service Data messages
 Black/White list Operator black/white list
 Multiple PDN Possibility to use different PDNs for multiple network access and services
 Band management Band lock, Used band status display
 APN Auto APN
 Bridge Direct connection (bridge) between mobile ISP and device on LAN
 Passthrough Router assigns its mobile WAN IP address to another device on LAN

 WIRELESS

Wireless mode IEEE 802.11b/g/n, Access Point (AP), Station (STA)
WiFi security WPA-PSK/WPA2-PSK Mixed Mode, WPA2-PSK, WPA2-EAP, WPA2-EAP/WPA3-EAP Mixed Mode, WPA3-EAP, WPA2-PSK/WPA3-SAE Mixed Mode, WPA3-SAE, OWE; AES-CCMP, TKIP, Auto Cipher modes, client separation
SSID/ESSID SSID stealth mode and access control based on MAC address
WiFi users Up to 100 simultaneous connections
Wireless Hotspot Captive portal (Hotspot), internal/external Radius server, built in customizable landing page

 ETHERNET

 WAN 1 x WAN port  10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX
 LAN 3 x LAN ports, 10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX

 NETWORK

 Routing Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, NHRP)
 Network protocols TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SMNP, MQTT, Wake On Lan (WOL)
 VoIP passthrough   support H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
 Connection   monitoring Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection
 Firewall Port forward, traffic rules, custom rules
 DHCP Static and dynamic IP allocation, DHCP Relay, Relayd
 QoS / Smart Queue   Management (SQM) Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
 DDNS Supported >25 service providers, others can be configured manually
 Network backup WiFi WAN, Mobile, VRRP, Wired options, each of which can be used as an automatic Failover
 Load balancing Balance Internet traffic over multiple WAN connections
 Hotspot Internal/external Radius server, captive portal, built in customizable landing page
 SSHFS Possibility to mount remote file system via SSH protocol (not available in standard FW)

 SECURITY

 Authentication Pre-shared key, digital certificates, X.509 certificates, TACACS+, Radius, IP & Login attempts block
 Firewall Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
 Attack prevention DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
 VLAN Port and tag based VLAN separation
 Mobile quota control Custom data limits for both SIM cards
 WEB filter Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only
 Access control Flexible access control of TCP, UDP, ICMP packets, MAC address filter

VPN

 OpenVPN Multiple clients and a server can run simultaneously, 27 encryption methods
 OpenVPN Encryption

DES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192,

BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256

 IPsec IKEv1, IKEv2, with 14 encryption methods for IPsec (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16)
 GRE GRE tunnel, GRE tunnel over IPsec support
 PPTP, L2TP Client/Server instances can run simultaneously, L2TPv3, L2TP over IPsec support
 Stunnel Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code
 DMVPN Method of building scalable IPsec VPNs
 SSTP SSTP client instance support
 ZeroTier ZeroTier VPN client support
 WireGuard WireGuard VPN client and server support
 Tinc Tinc offers encryption, authentication and compression in it's tunnels. Client and server support.

 MODBUS TCP SLAVE

 ID range Respond to one ID in range [1;255] or any
 Allow Remote Access Allow access through WAN
 Custom registers MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Slave functionality

 MODBUS TCP MASTER

 Supported functions 01, 02, 03, 04, 05, 06, 15, 16
 Supported data  formats 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC)

 MODBUS DATA TO SERVER

 Protocol HTTP(S), MQTT, Azure MQTT

 MQTT GATEWAY

MQTT Gateway Allows sending commands and receiving data from MODBUS Master through MQTT broker

 DNP3

 Supported modes TCP Master, DNP3 Outstation

 MONITORING & MANAGEMENT

 WEB UI HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log
 FOTA Firmware update from server, automatic notification
 SSH SSH (v1, v2)
 SMS SMS status, SMS configuration, send/read SMS via HTTP POST/GET
 Call Reboot, Status, Mobile data on/off, Output on/off, answer/hang-up with a timer, WiFi on/off
 TR-069 OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
 MQTT MQTT Broker, MQTT publisher
 SNMP SNMP (v1, v2, v3), SNMP Trap
 JSON-RPC Management API over HTTP/HTTPS
 MODBUS MODBUS TCP status/control
 RMS Teltonika Remote Management System (RMS)

 IOT PLATFORMS

 Cloud of Things Allows monitoring of: Device data, Mobile data, Network info, Availability
 ThingWorx Allows monitoring of: WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network Type
 Cumulocity Allows monitoring of: Device Model, Revision and Serial Number, WAN Type and IP, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength
 Azure IoT Hub Can send device IP, Number of bytes send/received, Temperature, PIN count to Azure IoT Hub server

 SYSTEM CHARACTERISTICS

 CPU Mediatek MIPS 24Kc 580 MHz
 RAM 128 MB, DDR2
 FLASH storage 16 MB, SPI Flash

 FIRMWARE / CONFIGURATION

 WEB UI Update FW from file, check FW on server, configuration profiles, configuration backup
 FOTA Update FW
 RMS Update FW/configuration for multiple devices at once
 Keep settings Update FW without losing current configuration

 FIRMWARE CUSTOMIZATION

 Operating system RutOS (OpenWrt based Linux OS)
 Supported languages Busybox shell, Lua, C, C++
 Development tools SDK package with build environment provided

  INPUT / OUTPUT

 Input 1 x Digital Input, 0 - 6 V detected as logic low, 8 - 30 V detected as logic high
 Output 1 x Digital Output, Open collector output, max output 30 V, 300 mA
 Events Email, RMS, SMS
 I/O juggler Allows to set certain I/O conditions to initiate event

 POWER

 Connector 4-pin industrial DC power socket
 Input voltage range 9 – 30 VDC, reverse polarity protection; surge protection >31 VDC 10us max
 PoE (passive) Passive PoE over spare pairs. Possibility to power up through LAN port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards, Mode B, LAN1 Port, 9 - 50 VDC
 Power consumption < 2 W idle, < 7 W Max

 PHYSICAL INTERFACES

 Ethernet 4 x RJ45 ports, 10/100 Mbps
 I/O’s 1 x Digital Input, 1 x Digital Output on 4-pin power connector
 Status LEDs 1 x bi-color connection status LED, 5 x connection strength LEDs, 4 x LAN status LEDs, 1 x Power LED
 SIM 2 x SIM slots (Mini SIM - 2FF), 1.8 V/3 V, external SIM holders, eSIM (Optional)
 Power 1 x 4-pin power connector
 Antennas 2 x SMA for LTE, 2 x RP-SMA for WiFi antenna connectors
 Reset Reboot/User default reset/Factory reset button

  PHYSICAL SPECIFICATION

 Casing material Aluminium housing, plastic panels
 Dimensions (W x H x D) 110 x 50 x 100 mm
 Weight 297 g
 Mounting options DIN rail (can be mounted on two sides), flat surface placement

OPERATING ENVIRONMENT

 Operating temperature -40 °C to 75 °C
 Operating humidity 10% to 90% non-condensing
 Ingress Protection Rating IP30

 REGULATORY & TYPE APPROVALS

   

 

Related articles

Product Catalog

TRB141

Post Cover
Product Catalog

RUTX50

Post Cover
Product Catalog

RUT956

Post Cover
Product Catalog

RUTX11

Post Cover